Sony Tektronix VX4792 - Page 159

Command Descriptions
3-76
VX4792 User Manual
TRIGger:LEVel (?)
The TRIGger:LEVel command sets the level on the external trigger at which the
trigger event is generated. The TRIGger:LEVel? query returns the level currently
set.
MODE
TRIGger:IMPedance, TRIGger:POLarity, TRIGger:SLOPe
TRIGger:LEVel <unit>
TRIGger:LEVel?
LEVel
<unit>
?
<Space>
:
TRIGger
<Level>::=<NR2>[<unit>]
where <unit>::={V | mV} with a range of –5.0 V to 5.0 V, in 0.1 V steps.
:TRIGGER:LEVEL 200mV
sets the level to 200 mV.
Group
Related Commands
Syntax
Arguments
Examples