Sony XVS-G1

226
File list sharing
You can share the file list when a sing
le disk recorder is
connected to multiple ports.
For details, see “Configuring file list sharing”
(page 409).
A file list cannot be shared for the AMP protocol.
Updating a file list
1 Open the Home > External Device > Device > File
List menu (16101.21).
2 Display the target device to set.
Select a tab to change the device (Device Ch1 to
Device Ch1
2) to display.
3 Press the [Refresh] button.
The file list is updated.
The file list shows the number, file name, file
du
ration, and the update date and time of the files.
• The update date and time of the files are not
disp
layed for the video disk communications
protocol.
• The file duration and file updat
e date and time are
not displayed for the Odetics protocol.
• If sharing a file list, the file list must be updated on
eac
h target device (Device Ch1 to Device Ch12).
For details about sharing a file list, see
“Configuring file list sharing” (page 409).
To sort the file list display
You can press a display item title to sort the display.
Pre
ssing a title switches between ascending and
descending order each time you press the title, and [v]
(ascending) or [V] (descending) is displayed on the right
side of the title.
No.: Sort by number
File Name: Sort by file name
Updated Date/Time: Sort by modification date and time
Sorting by update date and time is not supported for the
v
ideo disk communications protocol and Odetics
protocol.
Selecting a folder
Select a folder for the AMP protocol.
1 Open the Home > External Device > Device > Folder
List menu (16101.11).
2 Display the target device to set.
Select a tab to change the device (Device Ch1 to
D
evice Ch12) to display.
3 Press the [Refresh] button.
The folder list is updated.
The folder list shows the number and folder name.
To sort the folder list display
You can press a display item title to sort the display.
Pressi
ng a title switches between ascending and
descending order each time you press the title, and
[v] (ascending) or [V] (descending) is displayed on
the right side of the title.
No.: Sort by number
Folder Name: Sort by folder name
4 Select a folder.
You can also press the [Sel
ect Folder] button and
enter a folder number in the numeric keypad window.
5 Press the [Set] button.
The selected folder is set as the target.
Loading a file
Select the target file to load.
A file cannot be loaded
if the type of disk recorder is set
to [Recorder].
1 Open the Home > External Device > Device > File
List menu (16101.21).
2 Display the target device to set.
Select a tab to change the device (Device Ch1 to
D
evice Ch12) to display.
3 Select a file.
You can also press the [Select
File] button and enter
a file number in the numeric keypad window.
4 Press the [Load] button.
Note
Notes
Note
Note