General
1-1
R
1 General
1.1 The following should be principally observed ...
With this stud welder you have purchased a product which
• is state-of-the-art technology
• fully complies with the current safety requirements and
• enables successful working.
Before installing the stud welder, always observe the following:
• Store the operating instructions in a place accessible to every operator
• Ensure that the respective operator has read and understood the operating
instructions prior to installation. Each operator should confirm this per
signature.
• Prevent the stud welder being operated by unauthorized personnel
• Only trained personnel may operate the stud welder
Ꮨ MORTAL DANGER
Persons with pacemakers must not operate the stud welder and must not
stay in the vicinity of the stud welder while it is running.
Ensure that the stud welder is not operated near electronically sensitive life-
supporting equipment, such as in intensive care units in hospitals.
WARNING
Keep sufficient distance from electronic devices. When stud welding, highly
intensive electromagnetic fields are created which may permanently damage
these devices (e.g. television sets).
• Moreover, observe the safety instructions in chapter 3.
• Call a doctor in case of an accident.
Ꮨ MORTAL DANGER
The S-symbol is the symbol for welding current sources permitted for
operation with increased electric danger. The S-symbol on our stud welders
refers exclusively to the welding current circuit and not to the complete stud
welder.
To Next Page
Loading...
