Soyer BMS-10N - Information on the Documentation; Chapters of Operating Instructions

General
1-3
R
1.5 Information on the documentation
The following operating instructions come with the BMS-10N and BMS-10NV
stud welders:
• Operating instructions for stud welder BMS-10N, BMS-10NV
Order no.: P00191
For repeat-orders please contact:
Heinz Soyer Bolzenschweißtechnik GmbH
Etterschlag
Inninger Straße 14
D-82237 Wörthsee
Phone: ++49-(0) 81 53 / 8 85-0
Fax: ++49-(0) 81 53 / 80 30
E-Mail: verkauf@soyer.de
export@soyer.de
1.5.1 Chapters of operating instructions
The operating instructions describe the installation and operation of the stud
welder under normal conditions and comprise the following chapters in detail:
• Chapter 1 "General"
Information on application and product, as well as supplementary informa-
tion
• Chapter 2 "Description of stud welder"
Description of tip ignition technology and of the stud welder
• Chapter 3" Safety instructions"
All safety regulations which are relevant with regard to installation and
operation of the stud welding system
• Chapter 4 "Installation of stud welder"
• Chapter 5 "Initiation"
• Chapter 6 "Operation"
• Chapter 7 "Quality control"
• Chapter 8 "Maintenance"
Maintenance measures
• Chapter 9 "Troubleshooting"
Errors, possible causes and remedies
• Chapter 10 "Transport and storage"
• Chapter 11 "List of standards and guidelines"
• Chapter 12 "Terms of warranty"
• Chapter 13 "Spare parts"