EasyManua.ls Logo

Soyer BMS-10N - The Following Should be Observed before Starting the System

Soyer BMS-10N
69 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3-13
Safety instructions
R
You are therefore obliged to restrict the dangers to an inevitable degree and to
point these dangers out to the operator and other persons involved.
MORTAL DANGER
Persons with pacemakers must neither operate the stud welder nor stay
near it.
3.6 The following should be observed before starting the system...
Before starting the system, pay attention to the following information:
Juveniles under the age of 16 years must not operate the stud welding
system.
Read all of the operating instructions before starting the system.
Only qualified personnel are allowed to operate the system.
Prevent unauthorized use of the system by children or unqualified personnel.
Wear non-combustible, closed working clothes.
Wear a leather apron to protect your clothes from welding spatters that are
generated during the welding process.
Wear a head protection when carrying out welding works above your head.
MORTAL DANGER
When welding, do not wear clothes soiled with easily combustible
substances such as oil, grease and paraffin oil, etc.
Wear gauntlet gloves made of leather.
Wear neither rings, watches nor electrically conductive jewellery.
Wear protective goggles with eye-protecting lens of shade number 2
(DIN 58211, Part 6) to protect your eyes from welding spatters and flashes
of light that are generated during the process.
Wear side-shielded glasses when knocking off ceramic ferrules.
Wear ear protection. Capacitor discharge generates a loud bang.

Table of Contents

Related product manuals