10-35
Transport and storage
R
10 Transport and storage
The stud welder has a robust metal housing. Owing to the electronic compo-
nents it should be ensured, however, that transport is free from vibrations.
The stud welders BMS-10N and BMS-10NV have two handles at the side for
transport and mobile use within short distances.
These carrying handles are intended for transport by hand only.
☞ Never pull ropes through these handles to lift the system by
crane to the installation site. The system would become unstable
and might tilt from its original position. As a result the handles
could rip and the system fall on the ground.
DANGER TO HEALTH
Prevent unauthorized use of the stud welding system by children and
unqualified personnel.
After long system standstill, we recommend having the stud
☞ welder checked by a SOYER
®
serviceman prior to initiation.
To Next Page
Loading...
