9-32
R
Troubleshooting
9 Troubleshooting
The following list of errors, their causes and remedies is designed to help you
eliminate any trouble immediately on the spot. If it is difficult or impossible to
eliminate the trouble, please contact the SOYER customer service responsible
for your area or Heinz Soyer Bolzenschweißtechnik GmbH.
For address and telecommunication data, please refer to chapter 1.6, page 1-
4.
Ꮨ MORTAL DANGER
Always disconnect the connecting plug from the socket before opening the
housing of the stud welder. Only trained and appropriately qualified person-
nel are allowed to open the housing and to carry out works on the electric
power supply and stud welder.
DANGER OF ACCIDENTS
Only trained and appropriately qualified personnel are allowed to replace
components of the stud welding system.
Ꮨ MORTAL DANGER
Before replacing any components, make sure that the capacitors are dis-
charged.
To Next Page
Loading...
