Alarm Management
DVR User Manual
49
② Select one camera in the interface and then click “Open” button.
③ Click the image box to play the recording in the small playback box on the left side of the interface (the box which has image inside indicates
that the record data exist).
④ Refer to the picture below. Drag the color blocks on the time scale to select the recording data and then click “Export” button to pop up the
“Record Backup” window as shown below. Select the device name, backup format and path and then click “Export” button to start the backup.
⑤ Click the “Playback” button to play the recording in the playback interface (refer to 8.2 Playback Interface Introduction for details). Click “Exit”
to exit the interface.
Note: If you back up the record in private format, the system will back up a RPAS player to the USB
device automatically. The private format record can be played by RPAS player only.
To Next Page
Loading...
