Speco HRLN - Video Loss Settings; Warning Handling Settings; Alarm Event Notification; Alarm-Out

Alarm Management
DVR User Manual
62
9.4.2 Video Loss Settings
① Click StartSettingsAlarmExceptionVideo Loss Settings to go to the interface as shown below.
② Enable or disable “Record”, “Snapshot”, “Push”, “Alarm-out”, “Preset”, “Buzzer”, “Pop-up Video”, “Pop-up Message Box” and “E-mail”. The
Video Loss Settings are like that of the sensor alarm (see 9.1 Sensor Alarm for details).
③ Click “Apply” to save your settings.
9.4.3 Warning Handling Settings
① Click StartSettingsAlarmExceptionWarning Handling Settings to go to the interface as shown below.
② Enable or disable “Push”, “Alarm-out”, “Buzzer”, “Pop-up Message Box” and “E-mail”. The exception handling settings are like that of the
sensor alarm (see 9.1 Sensor Alarm for details).
③ Click “Apply” to save your
settings.
9.5 Alarm Event Notification
9.5.1 Alarm-out
① Click StartSettingsAlarmEvent Notification to go to the following interface.