Speco HRLN - Date and Time Configuration

Device Management
DVR User Manual
78
Device Name: The name of the device. It may display on the client end or CMS that help user to recognize the device remotely.
Video Format: Two modes: PAL and NTSC. Select the video format according to the camera.
Sequence Automatically: Check it and set “wait time”. The system will sequence automatically if it is not operated during the time you set.
11.2.2 Date and Time Configuration
Click StartSettingsSystemBasicDate and Time to go to the interface as shown below.
Set the system time, date format, time format and time zone of the DVR. The default time zone is filled in our default info. If the selected time zone
includes DST, the DST of the time zone will be checked by default. Click “Apply” to save the settings.
You can manually set the system time or synchronize system time with network through NTP.
Manual: select “Manual” in the “Synchronous” option and then click after the “System Time” option to set the system time.
NTP: select “NTP” in the “Synchronous” option and then enter the NTP server.