Remote Surveillance
DVR User Manual
85
View Camera
Click to view the cameras. You can view the number of all the added cameras and the online cameras. For instance, the left number
3 in on the left panel stands for the number of online cameras; the right number 4 stands for the number of all the added cameras.
Enter the camera name in the search box and then click to search the camera. Click to refresh the camera list.
View Scheme
Click to view the scheme (or planning). All schemes can be shown in the left panel. Double click the scheme name to invoke it
quickly
Tool Bar Introduction
Button Meaning
Screen mode button.
Click to disable OSD. Click to enable OSD.
Click to show full screen. Right click on the full screen to exit full screen.
Click “All Main Stream” or “All Sub Stream” to set the stream of all the cameras.
Manual alarm button. Click to pop up a window and then trigger and clear the
alarm-out in the window manually.
Click to preview all cameras.
Click to close all the preview cameras.
Click to start recording for all cameras to computer. Click to stop recording.
Click to start manual record for all cameras to the DVR. Click to stop manual
record for all cameras.
Click to enable audio conversation with the DVR.
Right Panel Introduction
Click on the right panel to show the panel and click to hide the panel. Click at the bottom of the panel to go to “PTZ”
panel. Click to go to “Lens Control”. Click to go to “Operation” panel.
To Next Page
Loading...
