47
Insert the Chip Card into the terminal’s Chip Card reader or PIN Pad (if fitted). A Sale transaction
will be initiated. Type in the Sale amount in pence (or cents for ROI) and press the green ‘ENTER’ k ey.
Example:
Typing in 1000 would equate to a value of £10.00 (€10.00 in ROI).
PLEASE NOTE:
If a mistake is made entering data, the entire field can be deleted by pressing the yellow
‘CLEAR’ key once.
Option 2
The cardholder must type in his/her PIN (Personal
Identification Number) on the terminal’s keypad
or the optional PIN Pad. After the PIN has been
entered, the cardholder should press the green
‘ENTER’ key on the PIN entry device.
The terminal will now connect to your acquirer
and display progress.
If the transaction is approved, the Approval Code
will be displayed and the terminal will print
the merchant’s copy of the receipt.
(See Appendix A for possible transaction responses).
Step 2
Sale (Inserting A Chip Card) (Cont.)
Page 47.
09/11/13 12:00
RESPONSE
APPROVAL 123456
09/11/13 12:00
Pinpad
****
ENTER PIN
TOTAL £10.00
To Next Page
Loading...
