3-11
Component Identification Operator Manual 122997-341
3.13 Feeder Bottle
Washing System
Feeder Bottle Washing System provides capability of processing a
loaded bottle cart during normal cycle operation. System includes a
quick disconnect coupler.
NOTE: Bottle washing cart is available as a separate accessory.
Cycle must be programmed to process bottle cart before starting
cycle operation.
3.14 Automatic Water
Flush System for Two
Racks
Automatic Water Flush System for two racks permits cleaning of
facility’s automatic watering system during normal cycle operation.
System includes a set of two hoses, each equipped with a quick dis-
connect fitting, mounted on service side carriage rail.
Hoses are manually connected to customer cage watering racks
moved into wash chamber. During Final Rinse filling, fresh hot water
is sent through heat exchanger and sprayed over cage watering
racks for programmed filling time interval.
To Next Page
Loading...
