Steris Basil 4600 - Routine Maintenance; General

6
6-1
Routine Maintenance Operator Manual 122997-341
6.1 General Procedures described in this section must be performed at regular
intervals as indicated. Indicated frequencies are minimums and
should be increased with increased usage of equipment. If a prob-
lem occurs, refer to S
ECTION 7, TROUBLESHOOTING.
A sample preventive maintenance schedule is included in this sec-
tion. Use sample schedule as a guide to establish a facility preven-
tive maintenance record for your washer.
WARNING – PERSONAL
INJURY AND/OR EQUIP-
MENT DAMAGE HAZARD:
• Regularly scheduled pre-
ventive maintenance, in
addition to faithful perfor-
mance of minor mainte-
nance described within
this manual, is required for
safe and reliable operation
of this equipment. Con-
tact STERIS to schedule
preventive maintenance.
• Only STERIS or STERIS-
trained service personnel
should make repairs and
adjustments to this equip-
ment. Maintenance done
by inexperienced, unquali-
fied personnel or installa-
tion of unauthorized parts
could cause personal
injury, invalidate war-
ranty, or result in costly
damage. Contact STERIS
regarding Service options.
WARNING – ELECTRIC
SHOCK AND/OR BURN HAZ-
ARD: Disconnect all utilities
to washer before servicing.
Do not service washer unless
all utilities have been prop-
erly locked out. Always fol-
low local occupational health
and safety regulations, as
well as electric and plumbing
codes.
WARNING – BURN HAZARD:
Allow unit to cool down
before performing any ser-
vice on mechanical compo-
nents and on piping.
Components and piping
become very hot during
operation.
ROUTINE MAINTENANCE