Steris Basil 4600 - Stop Cycle Operation; Abort Cycle Operation

4-19
Washer Operation Operator Manual 122997-341
4.5 Stop Cycle
Operation
1. Press STOP/RESET touch pad to immediately halt operation of
cycle in progress. Display screen indicates that cycle is/was
stopped:
CYCLE 4
CYCLE STOPPED!
... and printer records:
RINSE 1 2:54:48p 181.3
* ALARM 2:55:00P
STOP BUTTON PRESSED
2. Press CYCLE/START touch pad to resume cycle operation at
beginning of interrupted phase function (i.e., fill, recirculate,
drain). Phase resets to beginning of interrupted function,
CYCLE 4 180.5F
RINSE 1 T= 1:30
... and printer records:
* CYCLE RESUMED 2:55:22P
RINSE 1 2:55:23P 180.5
4.6 Abort Cycle
Operation
1. Press STOP/RESET touch pad to halt cycle in progress.
2. Press STOP/RESET touch pad a second time to abort cycle.
Display screen indicates that cycle was aborted,
CYCLE ABORT...
... and printer records:
* CYCLE ABORT 2:54:48P
Control automatically returns screen to selected cycle menu:
CYCLE 1 CYCLE 2
CYCLE 3 CYCLE 4
__indicates flashing position.
STOP
RESET
CYCLE
START
STOP
RESET
STOP
RESET
WARNING – PERSONAL
INJURY HAZARD: Items in
washing cart may move dur-
ing processing and be filled
with residual hot water or
protrude from cart at the end
of the cycle. Always wear
appropriate personal protec-
tive equipment (PPE) and
carefully remove items from
cart.