Steris Basil 4600 - Cycle Operation

4-4
122997-341 Operator Manual Washer Operation
4.3 Cycle Operation Basil
®
4600 Cage and Rack Washer and Basil
®
4602 Cage and
Rack Washer are equipped with a microcomputer control capable
of storing parameters for twelve distinct cycles. Authorized operators
have capability of customizing/programming all cycles to meet spe-
cific washing needs. For instructions on cycle programming or
changing cycle parameters, refer to S
ECTION 5, CYCLE PROGRAMMING.
On initial receipt of washer, each cycle is set with a basic demon-
stration cycle consisting of six sequential phases – Pre-wash, Wash,
Rinse 1, Rinse 2, Final Rinse and Exhaust. Refer to Table 4-1 for
phase values of demonstration cycle.
To begin cycle operation:
1. Set POWER-OFF/STANDBY switch, located behind printer door,
to POWER.
Unit name temporarily appears on screen, then screen displays
first cycle menu:
CYCLE 1
CYCLE 2
CYCLE 3 CYCLE 4
__indicates flashing position.
and printer records:
* CONTROL ON 8:32:31A
4/21/05
NOTE: If printer does not print when POWER-OFF/STANDBY
switch is set to POWER, press top of Printer Function Switch to
turn printer on.
2. Press CYCLE MENU touch pad until desired cycle menu
appears on screen. Display shows:
CYCLE 9
CYCLE 10
CYCLE 11 CYCLE 12
__indicates flashing position.
3. Press SELECT CYCLE touch pad until desired cycle name
flashes.
CYCLE 9 CYCLE 10
CYCLE 11 CYCLE 12
__indicates flashing position.
4. When desired cycle name is flashing, press CYCLE/START
touch pad. Name of selected cycle appears on screen and
remains displayed for five seconds.
PRESS START TO
PROCESS CYCLE 10
5. To start selected cycle, press CYCLE/START touch pad a sec-
ond time while selected cycle name is displayed on screen.
NOTE: If CYCLE/START is not pressed a second time while
selected cycle name is displayed, screen automatically returns to
cycle menu.
Table 4-1. Demonstration Cycle
Phase Values
Cycle
Phase
Time
(minutes)
Temperature
Pre-
Wash
1:00 HTW
Wash 5:00 140ºF (60ºC)
Rinse 1 1:30 180ºF (82ºC)
Rinse 2 1:30 180ºF (82ºC)
Final
Rinse
1:30 180ºF (82ºC)
Exhaust 1:30 N/A
SELECT
CYCLE
CYCLE
START
CYCLE
START