4-28
122997-341 Operator Manual Washer Operation
Display shows:
STANDBY - COOLDOWN
TANK COOLING
NOTE: If unit is provided with a controller-driven pH monitoring sys-
tem, additional displays are shown.
3. Display shows:
STANDBY - COOLDOWN
TANK DRAINING
4. Solution is cooled down (and Cool Down water valve energized)
for COOLDOWN TANK time. At end of neutralization phase
(OPTION), displays shows:
STANDBY - COOLDOWN
TANK DRAINING
5. When tank is empty, display shows:
COOLDOWN TANK EMPTY
After a two-second pause, display returns to DRAIN Menu:
SUMP ALK.TANK
ACID TANK COOLDOWN
__indicates flashing position.
4.12 PUMP/DRV
Function
To operate recirculation pump(s) and oscillating jet system manually:
1. From Manual Control MT= Menu, press SELECT CYCLE touch
pad until PUMP/DRV is flashing. Display shows:
FILL DRAIN
PUMP/DRV
DRIVE
__indicates flashing position.
2. With PUMP/DRV flashing, press CYCLE/START touch pad. If
sump is not full, display shows:
FILLING SUMP...
PRESS STOP TO ABORT
3. When sump is full, display shows:
SUMP IS FULL
After a two-second delay, display shows:
PUMPING/DRIVING...
PRESS STOP TO ABORT
__indicates flashing position.
NOTE: Recirculation pump(s) and oscillating jet system continue
to operate until Stop/Reset is pressed.
To Next Page
Loading...
