4-29
Washer Operation Operator Manual 122997-341
4. Press STOP/RESET touch pad when done. Display returns to
Manual Control Menu:
FILL DRAIN
PUMP/DRV
DRIVE
__indicates flashing position.
4.13 DRIVE Function To operate carriage drive system manually:
1. From Manual Control Menu, press SELECT CYCLE touch pad
until DRIVE is flashing. Display shows:
FILL DRAIN
PUMP/DRV DRIVE
__indicates flashing position.
2. With DRIVE flashing, press CYCLE/START touch pad. Display
shows:
DRIVING...
PRESS STOP TO ABORT
Carriage oscillates with doors open or closed.
NOTE: Carriage will continue to oscillate until Stop/Reset is
pressed.
3. Press STOP/RESET touch pad when done. Display returns to
Manual Control Menu.
FILL DRAIN
PUMP/DRV DRIVE
__indicates flashing position.
To Next Page
Loading...
