4-18
122997-341 Operator Manual Washer Operation
PHASE TIME F
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
PRE-WASH 01:00 HTW
DET-WASH 05:00
WATER DRAIN
TANK TEMP 140.0
RINSE 1 01:30
RINSE 2 03:00 180.0
F. RINSE 01:30 180.0G
EXHAUST 01:30 ------
NOTE: At this point, user may either initiate selected cycle or
exit Cycle Review mode. To initiate selected cycle, press
CYCLE/START touch pad twice. To exit Cycle Review mode,
press CYCLE MENU touch pad. Control exits mode and
returns display screen to selected cycle menu.
7. To bypass printout option, press STOP/RESET touch pad. Con-
trol exits Cycle Review mode and display screen returns to
selected cycle menu:
CYCLE 5 CYCLE 6
CYCLE 7 CYCLE 8
__indicates flashing position.
WARNING – BURN HAZARD:
• Inner surfaces of washer
are very hot after cycle
completion. Operator
should wear appropriate
Personal Protective Equip-
ment (PPE) and avoid all
contact with inner walls
when entering chamber to
unload washer.
• When cycle is complete,
partially open chamber
door and allow chamber
and load to cool. Hot
steam may escape
through door opening if
door is fully opened after a
cycle.
To Next Page
Loading...
