Before lowering the safety side, make sure that the resident’s limbs are not
located within the area of movement of the bars. This prevents the resident
from being crushed or sustaining other injuries.
Lift the upper bar
slightly with one hand
and hold it in place.
• With the other
hand, press the
corresponding
release button and
lower the safety
side. Caution! Do
not let it drop!
• Repeat the procedure for the other end of the bar.
Remove and store the centre supports
If the safety sides will not be
required for some time, the centre
supports can quickly be removed
and conveniently stored:
• With one hand, press the
release button 1 ; then pull the
centre support straight upwards
with the other hand.
• The cover flap of the centre
support holder 2
will then automatically spring
back into place.
To Next Page
Loading...