WARNING
Excessive water pressure or water and steam that
are too hot can damage truck components.
– Strictly adhere to the following steps.
– Only use high-pressure cleaners with a
maximum output power of 50 bar and at a
maximum temperature of 85°C.
– When using high-pressure cleaners, make
sure there is a distance of at least 20 cm
between the nozzle and the object being
cleaned.
– Do not aim the cleaning jet directly at adhe-
sive labels or information signs.
DANGER
Risk of fire! Deposits/accumulations of
combustible materials may ignite in the
vicinity of hot components (e.g. exhaust
pipes).
– Strictly adhere to the following steps.
– Regularly remove all deposits/accumula-
tions of foreign materials in the vicinity of
hot components.
– Do not place combustible materials in the
engine compartment.
DANGER
Risk of fire! Flammable fluids can be ig-
nited by hot components on the truck.
– Strictly adhere to the following steps.
– Do not use flammable fluids for cleaning.
– Observe the manufacturer's guidelines for
working with cleaning materials
CAUTION
Abrasive cleaning materials can damage component
surfaces!
Using abrasive cleaning materials that are unsuitable
for plastics may dissolve plastic parts or make them
brittle. The screen on the display operating unit may
become cloudy.
– The procedures outlined below must be followed
in all cases.
Use and operation
4
Cleaning
9360128011601 EN - 03/2020
To Next Page
Loading...
Need help?
General
