Sealt belt
Adjustment of the driver’s seat
CAUTION
Slide the driver’s seat to find the best operating posi-
tion relative to the steering wheel, the accelerator
and braking pedals, and the joystick.
Before starting the truck and whenever changing
drivers, adjust the seat to match the driver’s weight
and make sure that the settings have all engaged
properly. Do not place any objects in the driver’s ro-
tation range.
NOTE
Remaining in a sitting position for long periods
of time puts a great amount of pressure on the
spine. Make sure this pressure is reduced by
bending forwards frequently.
Moving the driver’s seat
– Lift the lever(1)and hold.
– Push the driver’s seat into the desired posi-
tion.
– Release the lever.
– Ensure that the driver’s seat is securely en-
gaged.
Adjusting the seat backrest
Do not put pressure on the seat backrest while
engaging it.
– Turn the knob(2)clockwise.
– Move the backrest forwards and backwards
until the driver finds the best sitting position.
– Release the knob.
Use and operation
4
Sealt belt
5560128011601 EN - 03/2020
To Next Page
Loading...
Need help?
General
