– Contact your service center if chains are
suffering abnormal force.
– Keep the chains clean, ensure no excessive
dust exits; Immediately lubricate the chains
with specified chain spay if chain surfaces
are dry.
NOTE
If the truck is used in the food industry, please
use lubricating grease in place of spray.
– During operation or maintenance, stop us-
ing the forklift if there is any crack of chain
plate.
Checking the coolant level
DANGER
Risk of burns. When the engine is hot, the radiator
is under pressure and hot coolant can spray out if
the radiator cap is unscrewed.
– Check coolant level when the engine is cold and
switched off.
Use and operation
4
Remaining ready for operation
46 60128011601 EN - 03/2020
To Next Page
Loading...
Need help?
General
