Picking up a load
DANGER
The truck may tip over if the load is too heavy.
Before picking up the load, check that the dimen-
sions and weight of the load lie within the permitted
range for the truck. This information can be found on
the capacity rating plate.
DANGER
There is a risk to life caused by a falling load or if
parts of the truck are being lowered.
– Never walk or stand underneath suspended loads
or raised fork arms.
– Never exceed the maximum load values specified
on the capacity rating plate. Otherwise, stability
cannot be guaranteed.
– Only store pallets that do not exceed the
specified maximum size. Damaged loading
equipment and incorrectly formed loads
must not be stored.
– Attach or secure the load to the lifting ac-
cessory so that the load cannot move or
fall.
– Store the load so that the specified aisle
width is not reduced by protruding parts.
– Drive carefully towards the racking.
6210_800-005
Use and operation
4
Handling loads
7960128011601 EN - 03/2020
To Next Page
Loading...
Need help?
General
