Changing the engine oil filter
ENVIRONMENT NOTE
Be environmentally responsible. Dispose of
used oil in accordance with applicable laws
and regulations. Failure to comply with laws
and regulations will result in serious damage
to the environment.
– Rotate the engine oil filter (1) anticlockwise
with a filter wrench (2).
– Clean the mounting surface of the engine
oil filter.
– Lightly coat the new filter sealing ring with a
thin layer of engine oil.
– Hand-fit the new filter to the filter cover and
turn clockwise until the mounting surface
comes into contact with the surface of the
filter cover; then tighten 3/4 of a turn using a
filter wrench.
NOTE
Check the spare parts manual to find the part
number of usable engine oil filters.
– Fill the engine with engine oil according to
the detailed instructions in "Filling engine
oil"
Maintenance
5
Maintenance service
120 60128011601 EN - 03/2020
To Next Page
Loading...
Need help?
General
