– Take the foot off the accelerator pedal (1).
– Press the brake pedal (2) until the truck is
stationary.
– Actuate the parking brake to keep the fork-
lift truck braked.
Procedure in the event of failure of the
service brake
– Bring the truck to a standstill by actuating
the parking brake and park it securely.
– Do not operate the truck again until the
service brake has been repaired and is
functional.
Parking brake
The parking brake must be actuated every
time the driver exits the truck.
NOTE
If the driver exits the truck without actuating
the parking brake, a warning signal sounds.
This signal even sounds if the truck has al-
ready been switched off and the ignition and
stop key has been removed.
Actuating the parking brake:
– Pull down the parking brake lever(1) until
the lock position is reached and the parking
brake indicator light comes on.
Releasing the parking brake:
– Release the parking brake lever(1).The
parking brake will return to its original posi-
tion and the parking brake indicator light will
turn off.
DANGER
The forklift truck must not be operated if there are
problems with the braking system.
If there is a fault with the braking system or parts of
the system have abraded, please contact your au-
thorised dealer.
Use and operation
4
Brake system
6960128011601 EN - 03/2020