– Clean plastic parts only with cleaning mate-
rials intended for plastic parts.
– Observe the manufacturer's guidelines for
working with cleaning materials
CAUTION
Excessive water pressure or water and steam that
are too hot can damage truck components.
– The procedures outlined below must be followed
in all cases.
– Clean the truck exterior with water-soluble
cleaning materials and water (water jet,
sponge, cloth).
– Clean all walk-in areas, the oil filling open-
ings and their surroundings, and the lubri-
cating nipples before lubricating.
NOTE
Please note: The more often the truck is
cleaned, the more frequently it must be lubri-
cated.
Cleaning the electrical system
CAUTION
Cleaning electrical system parts with wa-
ter can damage the electrical system.
– Cleaning electrical system parts with
water is forbidden!
– Use dry cleaning materials in accord-
ance with the manufacturer's specifi-
cations.
– Do not remove covers etc.
– Clean the electrical system parts with a
metal-free brush and blow the dust off with
low-pressure compressed air.
7071_003-091
Use and operation
4
Cleaning
94 60128011601 EN - 03/2020
To Next Page
Loading...
Need help?
General
