– Tilt the lift mast backwards. The load can
now be transported.
Increasing the lifting speed
– Fully depress the brake Inching pedal (1)
and hold it down. The drive wheels are now
uncoupled from the engine.
– Pull the "lift" operating lever as far back as
possible. The truck begins to lift.
– Depress the accelerator pedal (2) to in-
crease the engine speed. This action in-
creases the lifting speed. In this way, the
lifting speed can be controlled using the ac-
celerator pedal.
5060_003-101
Use and operation
4
Handling loads
82 60128011601 EN - 03/2020
To Next Page
Loading...
Need help?
General
