Stober POSITool MDS 5000 - Communication; Communication with MDS 5000 and FDS 5000

7
Communication
ID 442233.05
WE KEEP THINGS MOVING
Operation manual
26
7 Communication
Since communication with the MDS 5000 and FDS 5000 is very different from the
SDS 5000, these two methods of communication will be described separately.
7.1 Communication with MDS 5000 and FDS 5000
Communication between PC and inverter is established with a serial connection.
A cable (cat. no. 41488) is connected to a serial interface on the PC and to
terminal X3 of the inverter as shown in the adjacent figure.
Fig. 7-1 Serial connection to communication between inverter and PC
22
33
44
55
Housing
InverterPC
FDS cable G3
ID. No. 41488