Need help?Do you have a question about the Stober POSITool MDS 5000 and is the answer not in the manual?
General| Enclosure Rating | IP20 |
|---|---|
| Output Power | 5000 W |
| Output Frequency | 0...400 Hz |
| Frequency Range | 0...400 Hz |
| Protection Features | Overvoltage, Undervoltage, Overtemperature, Short circuit |
| Communication Interfaces | CANopen, Profibus |
| Humidity | 95% relative humidity, non-condensing |
Details the manual's scope, including installation, structure, levels, communication, and diagnostics.
Lists related STÖBER manuals for POSITool, MDS 5000, FDS 5000, and SDS 5000.
Provides contact information (phone, email) for technical questions and documentation inquiries.
Outlines STÖBER's obligation for software error correction and customer responsibilities.
Describes POSITool's property, licensing, and authorized use for inverter configuration and monitoring.
Emphasizes the importance of keeping technical documentation with the product.
Explains the meaning of NOTICE, CAUTION, and WARNING symbols used in the manual.
Guides through creating a new project using a step-by-step configuration assistant.
Explains how to open an existing project file through the start screen.
Describes reading data from a connected inverter to create reverse documentation.
Details the functions of buttons available on the POSITool toolbar.
Describes the project view and available file management menu items for projects.
Explains how inverter entries are identified and structured within the project view.
Details options for managing inverters within a project, including adding, deleting, and editing.
Explains creating and assigning SDS 5000 inverters to an IGB entry for communication.
Explains the parameter list, its content, and how to modify parameters.
Describes the POSITool configuration interface and structure, including blocks and levels.
Covers libraries, hierarchy view, and screen/view menu settings.
Explains parameter indication levels and how to set them using parameter A10.0.
Describes configuration levels 0-3 and their impact on programming capabilities.
Details the procedure for setting access levels via the "Change access level" dialog.
Explains serial connection methods for communication with MDS 5000 and FDS 5000 inverters.
Details settings and online operation procedures for MDS 5000 and FDS 5000.
Details communication possibilities with SDS 5000 via IGB, direct, or remote connections.
Covers IGB network requirements, communication interfaces, and topology.
Guides on setting up direct connections and configuring IP addresses for SDS 5000.
Explains reading and writing configuration and parameter data with SDS 5000.
Explains the fault memory, its contents, and how it records the last 10 faults.
Details how to indicate, change, and manage selected parameters in a custom list.
Describes the Simubox software for monitoring the operator panel display and initiating key functions.
Explains channel selection and trigger conditions for recording parameter events.
Details how to control Scope pictures, manage them, and adjust scaling.
Explains service functions and printing saved or current Scope pictures.
Details how to access the print function and the data that can be printed.
Explains importing and exporting parameter values to/from text files.
Guides on importing parameter values from a CSV file into POSITool.
Explains how to integrate and open PDF product descriptions within POSITool.
Describes how to set the POSITool start screen and welcoming dialog behavior.
Explains Autosave activation and backup file creation for project data.
To Next Page
