Stober POSITool MDS 5000 - POSITool - Options; Print; Importing;exporting of parameter values

9
POSITool – Options
ID 442233.05
WE KEEP THINGS MOVING
Operation manual
52
9 POSITool – Options
9.1 Print
The print function can be accessed via the menu item File/Print .... The inverter
to be printed is selected in the print dialog with a combination box (8.4.10). The
following data can be shown in a printout:
• Configuration information, with optional configuration commentary
• Parameter values of the various axes or the global area. The scope of the
parameters can be limited with the access level and selection of the changed
parameters.
• Fault memory in online operation or in a reverse documentation.
• Stored and current Scope pictures. (Scope pictures can also be printed
directly from Scope.)
The dialog offers several buttons. This is where a preview of the printout can be
indicated, the printer and the page can be set up and the global settings can be
switched to.
9.2 Importing/exporting of parameter values
Parameter values can be imported and exported to a text file and archived. These
functions are available in the File menu.
9.2.1 Export
First an inverter is selected in the dialog for exporting the parameter values. In the
tree structure which appears below you can choose between various axes and
the global area. The number of parameters to be exported can be limited by
specifying the access level. In addition the export can be limited just to changed
parameters.