Stober SC6 Series Commissioning Instructions

STÖBER 8 | Commissioning
11/2017 | ID 442793.00
63
8.1.4 Specifying the project
Finally, specify your project.
1. Highlight the project P1: Project1 in the project tree.
2. Change to the project menu and click Project configuration.
ð The Project window opens.
3. Establish the relationship between your circuit diagram and the newly created project in
DriveControlSuite.
Equipment: Specify the equipment code of the project.
Designation: Give a clear and meaningful name to the project.
Version: Specify a version for the project.
Version description: If necessary specify supporting additional information such as the
change history of the project.
4. Confirm with OK.
8.2 Mapping the mechanical drive model
Smooth operation of a drive train in combination with one or more drive controllers requires
mapping the associated real mechanical environment in DriveControlSuite.
The following chapters provide explanations of the configuration options for rotational and
translational drives in combination with different position or motor encoders. Position encoders
are generally optional, whereas the use of a motor encoder depends on the control type and
motor type.

Stober SC6 Series Specifications

General

Brand	Stober
Model	SC6 Series
Category	Controller
Language	English