Stober SC6 Series Commissioning Instructions

STÖBER 1 | Foreword
11/2017 | ID 442793.00
5
1 Foreword
The compact stand-alone SC6 drive controller allows for sensorless control of STOBER LM
series Lean motors. These motors provide energy efficiency at the performance level of a
synchronous servo motor. With higher efficiency than that required for comparable IE4
asynchronous motors, they also guarantee investment protection. However, the SC6 can also
be used in combination with asynchronous motors and synchronous servo motors, such as the
STOBER EZ series, as well as with encoders. The SC6 drive controller is available in three
sizes with a nominal output current of up to 19A: sizes 0 and 1 as a double-axis controller, size
2 as a single-axis controller.
Features
§ Sensorless position control by STOBER Lean motors
§ Control of rotary synchronous servo motors, asynchronous motors and torque motors
§ HIPERFACE DSL One Cable Solution
§ Electronic motor nameplate via HIPERFACE DSL or EnDat 2.2 digital encoder interface
§ Integrated EtherCAT or PROFINET communication
§ STO safety technology using terminals or STO and SS1 using FSoE (Safety over
EtherCAT): PLe/SIL3
§ Integrated holding brake activation
§ Single-ended load on double-axis controllers for operation of motors with different power
§ Energy supply over DC link connection

Stober SC6 Series Specifications

General

Brand	Stober
Model	SC6 Series
Category	Controller
Language	English