For SN510, SN710 and SN910 models, the packaging should also contain four non-slip rubber
feet.
For the purpose of installing the appliance in a rack, SN510, SN710, SN910 and SN6100 models
have brackets mounted by default.
For SN2100 and SN3100 models, the packaging should also contain a set of brackets, rails and
screws for mounting the Firewall in a rack.
For SN6100 models, the packaging should also contain a set of rails and screws for mounting the
Firewall in a rack.
The SNi40 model is equipped with a fastener for a 35mm-wide DIN rail (EN50022 standard)
NOTE
As SN510, SN710 and SN910 Firewalls can be installed on a desk or in a rack, their non-
slip rubber feet are delivered separately. Only products that cannot be racked (SN160,
SN160W, SN210, SN210W and SN310) are sold with the rubber feet already attached.
The documentation provided includes:
l General Conditions of Use and User License,
l Safety Rules and Installation Precautions,
l Quick Installation Guide,
l Installation guide for the set of rails (SN2100, SN3100 and SN6100).
If any element is missing, contact your distributor immediately.
SNS - PRODUCT PRESENTATION AND INSTALLATION 2019
UPON RECEIVING YOUR FIREWALL
Page 10/66 sns-en-SNrange_installation_guide-2019 - 09/2019
To Next Page
Loading...
