INITIAL CONNECTION TO THE PRODUCT
By default, the product is administered through its INTERNAL interface. On all models, this
interface is identified by the number 2 (IN).
To obtain the description of the interfaces, refer to the section PRESENTATION OF THE SN RANGE.
Requirements
Minimum configuration for administering a Stormshield Network Firewall
Lowest version of the OS (firmware)
For the following models, the lowest firmware versions required are:
l SN160, SN160W, SN210, SN210W, and SN310: V3.1.1
l SN510 and SN710: V1.4.1 in version 1 and V2.2.0 in version 2
l SN910: V1.2.3
l SN2100 and SN6100: V3.7.0
l SN3100: V3.7.5
l SNi40: V2.3.4
Web administration interface
The configuration interface on Stormshield Network Firewalls can be accessed via a web browser
and benefits from the latest breakthroughs in user friendliness and simplicity of use. It is
compatible with the following browsers:
l Internet Explorer 7 and +
l Firefox 3.6 and +
Stormshield Network administration suite
Stormshield Network supports the execution of the Stormshield Network Administration Suite
software in the following environments:
l Microsoft Windows 7 and 8,
l Microsoft Windows Server 2008 and 2012.
Preparing the Internet access
Before installing the SN Firewall, ensure that the devices that connect to the Internet (if the
Firewall has to be connected to the Internet) have been appropriately installed and configured.
SNS - PRODUCT PRESENTATION AND INSTALLATION 2019
INITIAL CONNECTION TO THE PRODUCT
Page 44/66 sns-en-SNrange_installation_guide-2019 - 09/2019
To Next Page
Loading...
