EasyManua.ls Logo

Stormshield SN310 - Updating the License; Retrieving the License; Installing the License

Stormshield SN310
66 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
UPDATING THE LICENSE
Your appliance is sold with a temporary license. You will therefore need to update this license.
If you have acquired an additional option, you will need to update your product with the license
that will allow you to use this option.
WARNING
Options that require the firewall to be rebooted are listed in the User Manual, under the
License section, at: https://documentation.stormshield.eu
Please refer to the procedure below to find out how to update your product license:
Retrieving the license
l
Go to your Secure Area at https://mystormshield.eu/
NOTE
The registration stage allows you to obtain the password to access your Secure area.
l
Enter your login and password then confirm or register in order to receive them. The client
secure area homepage will appear.
l
Click on "Product management". You will then see a list of all the Stormshield Network
products registered in this area.
l
Select the product for which you wish to retrieve the license, by clicking on the product’s
serial number. Details of the license will be displayed.
NOTE
Before you download the license, you will need to know your product’s version. If you do
not know it, it is indicated on a label affixed to the product’s cardboard packaging. If you no
longer have the packaging, or if you have since updated your product, connect to your
product via the web administration interface. The product’s version will be indicated in the
dashboard of the web application.
Installing the license
If you have never installed a license on the product, the details of the license will be of the
temporary license. To install the license that had been downloaded from the client secure area,
proceed as follows:
Via the web administration interface, go to the General tab of the License module.
l To manually install a license, insert the downloaded file in the relevant field. It is however
possible to configure an automatic search and installation of the license.
l The full procedure is set out in the User Manual, under the License section, at:
http://documentation.stormshield.eu.
SNS - PRODUCT PRESENTATION AND INSTALLATION 2019
UPDATING THE LICENSE
Page 53/66 sns-en-SNrange_installation_guide-2019 - 09/2019

Table of Contents

Other manuals for Stormshield SN310

Related product manuals