IMPORTANT
Avoid in particular direct exposure to sunlight. Always keep adequate distance around the
appliance’s vents in order to guarantee a free flow of air, thereby preventing the possibility
of overheating.
IMPORTANT
Do not place objects on your Stormshield Network appliance.
IMPORTANT
The Stormshield Network Firewall has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the Firewall is operated in
a commercial environment. The Stormshield Network Firewall generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of
this Firewall in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
The Stormshield Network Firewall complies with the requirements set out in the European
standard EN55032, Class A. In a residential environment, a Class A product may cause
radioelectric interference, for which the user may need to take appropriate measures.
Conditions of use (SNi40 model)
The SNi40 firewall has been designed to run continuously in a server room.
WARNING
The Firewall has to be installed in compliance with the state of the art corresponding to the
practical terms of secure installation, namely: in protected premises with limited access. In
order to guarantee the integrity of the product and to avoid compromising the security of
your installation, all unauthorized access to the Firewall has to be avoided.
NOTE
Ensure that the cables do not obstruct passageways to prevent them from being pulled
out or the product from falling.
Your Stormshield Firewall is intended for indoor use, industrial environment (refer to product
specifications), away from areas that may receive rainfall, floods or excessive humidity. It must
be installed away from sources of shocks, vibrations, and dust, in an environment where the
temperature conforms to the product's specifications.
The ideal ambient temperature is around 25°C. The table below sets out the operational
temperature, storage temperature and humidity level for the SNi40 model.
SNi40 model
Operating
temperature
Relative humidity
operating (%)
Storage
temperature
Relative humidity
storage (%)
-40° to +75°C
(-40° to +167°F)
0% to 95%
without condensation
-40° to +85°C
(-40° to +185°F)
5% to 95%
without condensation
The table below sets out the operational temperature, storage temperature and humidity level for
the power adapter, which is sold separately.
Power adapter for SNi40 models (optional)
Operating
temperature
Relative humidity
operating (%)
Storage
temperature
Relative humidity
storage (%)
0° to +40°C
(+32° to +104°F)
10% to 90%
without condensation
-20° to +70°C
(-4° to +158°F)
10% to 90%
without condensation
SNS - PRODUCT PRESENTATION AND INSTALLATION 2019
INSTALLATION PRECAUTIONS
Page 16/66 sns-en-SNrange_installation_guide-2019 - 09/2019
To Next Page
Loading...
