4 The USB 3.0 port can be used for secure configurations or upgrades. You can also plug a USB
key or an approved USB modem into it.
5 The USB 2.0 port can be used for secure configurations or upgrades. You can also plug a USB
key or an approved USB modem into it.
SN160 and SN160W models hold 5 1GbE ports:
6 The first zone is the EXTERNAL (OUT) interface, in external mode by default. It makes up the
zone that is needed for connecting to the internet.
7 The second zone is identified by default in INTERNAL (IN) mode and is made up of 4 switched
ports.
8 This is the button for resetting the appliance to its factory settings (defaultconfig).
9 Sockets for Wi-Fi antennae.
* The recommended type of SD card isat least Class10 (C10) UHS Class1 (U1) or App Performance 1
(A1),SDHC standard. The memory card must be in a full-size physical SD format, in SDHC or SDXC standard.
Onlyadapters provided withthe card must be used. The maximummemory size supported is2TB.
Stormshield recommendsthe use of high-endurance/industrial cards or preferably, those that have a
built-in MLC flash chip developed by major brands(e.g., SanDisk, Western Digital,Innodisk, Transcend,
etc.)and with at least 32GB of memory.
** This connection in console mode requires the installation of a driver. Depending on your operating
system, you can download a driver from: http://www.ftdichip.com/Drivers/VCP.htm
SN210 and SN210W models
SN210 and SN210W firewalls are fanless. The products come with an external power adapter.
LEDs Front panel:
This model has its LEDs on the front panel as shown below:
1 Online LED (green)
2Status LED (green)
3 Power LED (yellow)
1 OUT interface
2 IN interface
3 DMZ interface
4 Wi-Fi interface
SNS - PRODUCT PRESENTATION AND INSTALLATION 2019
PRESENTATION OF SN MODELS
Page 25/66 sns-en-SNrange_installation_guide-2019 - 09/2019
To Next Page
Loading...
