Stratasys Objet350 - Page 185

Objet350 User Guide 6 Operating and Maintaining the Objet350 3DPrinter
DOC-17001 Rev.G 6-54
RemovingtheDefectiveHead
10.Ontheprintblock,releasetheupperandlowerscrewsthatsecurethe
printheadintheblock.(Ifnecessary,youmayuseascrewdrivertoloosen
thescrews.)
Figure6-72Releasingthelockingscrews
11.Pressdownontheupperandlowerlockingscrewstoreleasetheprint
head.
Figure6-73Releasingtheprinthead