Stratasys Objet350 - Page 186

Objet350 User Guide 6 Operating and Maintaining the Objet350 3DPrinter
DOC-17001 Rev.G 6-55
12.Loosenthescrewsonthedoorofthecompartmentprotectingthe
print-headdrivercards(A),thenpullandliftupthedoor(B).
Figure6-74Openingtheprint-headcompartment
13.Pulltheprint-headdrivercardoutofitssocketsothattheheadisfree(A),
andremoveitfromthebottomoftheprintblock(B).
Figure6-75Releasingtheprint-headdrivercardtoremovethehead