Struers LaboPol-60 - Page 5

8.1.6 The specimen mover 41
8.1.7 The flexible specimen holder 45
8.1.8 LaboDoser-100 with LaboForce-100 48
8.1.9 LaboDoser-10 with LaboForce-100 48
8.2 Operating the device 48
8.2.1 Control panel functions 48
8.2.2 Water tap 50
8.2.3 The Spin function 50
8.2.4 The splash guard 51
8.2.5 The display 51
8.2.6 Main menu 52
8.2.7 Navigating in the display 52
8.2.8 Changing settings and text 53
8.2.9 Software settings 53
8.2.10 Configuration 54
8.2.11 Maintenance menu 57
8.3 The preparation process 58
8.3.1 Preparation modes 58
8.3.2 Starting and stopping the preparation process 62
9 LaboForce-Mi 63
9.1 Installation 64
9.1.1 Unpacking 64
9.1.2 Checking the packing list 64
9.1.3 Installation - LaboForce-Mi 64
9.1.4 The specimen mover 65
9.2 Operating the device 67
9.2.1 Control panel functions 67
9.2.2 Water tap 68
9.2.3 The Spin function 68
9.2.4 The splash guard 69
9.2.5 Inserting a specimen 69
9.2.6 Adjusting the force 69
9.2.7 Forced rotation of specimens 70
9.2.8 Manual preparation 70
9.2.9 Starting and stopping the machine 71
9.2.10 Removing the specimens 72
9.2.11 Changing the specimen mover plate 72
10 LaboDoser-10 73
10.1 Unpacking 74
LaboPol-60 5