Struers LaboPol-60 - Page 6

10.2 Checking the packing list 74
10.3 Installation 74
10.4 Operating LaboDoser-10 75
10.5 Changing lubricant/suspension 75
11 LaboDoser-100 76
11.1 Installation 76
11.1.1 Unpacking 76
11.1.2 Checking the packing list 77
11.1.3 Installing LaboDoser-100 77
11.2 Operating LaboDoser-100 78
11.2.1 Changing lubricant/suspension 78
11.2.2 Cleaning the tubes 79
11.2.3 Changing the pump tubes 79
12 Maintenance and service - LaboPol-60 81
12.1 General cleaning 81
12.2 Daily 82
12.3 Weekly 82
12.3.1 LaboForce-100 - the specimen mover head 82
12.4 Monthly 83
12.4.1 LaboForce-50 - pressure feet 83
12.4.2 LaboForce-100 - Emptying the water/oil filter 83
12.5 Annually 84
12.5.1 Testing safety devices 84
12.5.2 Emergency stop 84
12.6 Spare parts 84
12.7 Service and repair 85
12.7.1 Service check - LaboForce-100 85
12.8 Disposal 86
13 Troubleshooting - LaboPol-60 86
13.1 Troubleshooting - LaboPol-60 86
13.2 LaboForce-50 87
13.3 LaboForce-100 88
13.3.1 Messages and errors - LaboForce-100 88
13.4 LaboForce-Mi 91
14 Technical data 92
14.1 Technical data 92
14.2 Safety Circuit Categories/Performance Level 93
14.3 Noise and vibration levels 93
14.4 Technical data - equipment units 93
6 LaboPol-60