List of Supported Commands
88 SL500: Interface Reference Manual • July 2008 Revision: F • 96122
List of Supported Commands
TABLE 6-5 Supported Commands
Command and Page Number Hex Code
Initialize Element Status on page 90 07
Initialize Element Status With Range on page 91 37
Inquiry on page 92 12
Log Sense on page 99 4D
Mode Select (6) on page 105 15
Mode Select (10) on page 116 55
Mode Sense (6) on page 127 1A
Mode Sense (10) on page 142 5A
Move Medium on page 167 A5
Persistent Reserve In on page 169 5E
Persistent Reserve Out on page 175 5F
Position to Element on page 179 2B
Prevent/Allow Medium Removal on page 180 1E
Read Element Status on page 181 B8
Release (6) on page 204 17
Release (10) on page 205 57
Report LUNS on page 206 A0
Request Sense on page 208 03
Request Volume Element Address on page 219 B5
Reserve (6) on page 222 16
Reserve (10) on page 225 56
Send Diagnostic on page 227 1D
Send Volume Tag on page 229 B6
Test Unit Ready on page 231 00
Write Buffer on page 232 3B
To Next Page
Loading...
Need help?
General
