Interface Cables
10 SL500: Interface Reference Manual • July 2008 Revision: F • 96122
Connector
The SCSI connector for the library and the tape drives is a high-density (HD),
shielded, 68-pin, D-type connector for P-cable attachments.
Terminator
You must terminate all SCSI signals at each end of the SCSI bus by connecting a
terminator to one of the SCSI connectors on the device at each end of the SCSI bus.
TABLE 2-1 lists the terminators for the single-ended, and LVD alternative as well as
the adapter:
TABLE 2-1 SCSI Terminators
Part Number Description
10148002 68-pin, fast/narrow single-ended
10097653 68-pin LVD-SE multi-mode (actively switches between LVD and
single-ended mode)
To Next Page
Loading...
Need help?
General
