xxii SL500: Interface Reference Manual • July 2008 Revision: F • 96122
Alert Messages
Alert messages call your attention to information that is especially important or
that has a unique relationship to the main text or graphic.
Note – A note provides additional information that is of special interest. A note
might point out exceptions to rules or procedures. A note usually, but not always,
follows the information to which it pertains.
Related Publications
For your convenience, the following sections list publications that provide
information about the interfaces and libraries mentioned in this manual.
Listed publications are subject to change without notice.
Publication Part Number
American National Standard Dictionary for Information Processing Systems X3/TR-1-82
SCSI–3 Primary Commands (SPC) X3.301–1997
SCSI–3 Primary Commands (SPC–2) T10/Project 1236D
SCSI–3 Medium Changer Commands (SMC) T10/Project 1383D
SCSI–3 Architecture Model (SAM) X3.270–1996
SCSI Architecture Model – 2 (SAM–2) T10/Project 1157D
VIPER 2000 LTO Tape Drive SCSI Reference Manual T001
VIPER 2000 LTO Tape Drive SCSI Reference Manual 10006952-XXX
SCSI Parallel Interface (SPI-5) T10/Project 1525D
Fibre Channel Physical and Signaling Interface (FC–PH)
X3.230–1994 Revision 4.3
X3.230–1996 (Amendment 1)
X3.230–1997 (Amendment 2)
Fibre Channel Physical and Signaling Interface (FC–PH–2) X3.297–1996 Revision 7.4
Fibre Channel Physical and Signaling Interface (FC–PH–3) X3.303–199x Revision 9.3
Fibre Channel Arbitrated Loop (FC–AL) X3.272–1996 Revision 4.5
Fibre Channel Arbitrated Loop (FC–AL–2) X3.272–199x Revision 7.0
Fibre Channel Protocol for SCSI (FCP) X3.269–1996 Revision 12
Fibre Channel Protocol for SCSI (FCP–2) T10/Project 1144D Revision 01
Fibre Channel Tape (FC–Tape) NCITS TR–XX Revision 1.17
To Next Page
Loading...
Need help?
General
