Mode Sense (6)
140 SL500: Interface Reference Manual • July 2008 Revision: F • 96122
I/E-> I/E This field identifies the support for the Move Medium command, where both
the source, and the destination is a CAP cell.
The library returns a value of 1.
I/E -> ST This field identifies the support for the Move Medium command, where the
source is a CAP cell, and the destination is a cartridge tape storage cell.
The library returns a value of 1.
I/E -> MT This field identifies the support for the Move Medium command, where the
source is a CAP cell, and the destination is the hand.
The library returns a value of 0.
DT -> DT This field identifies the support for the Move Medium command, where the
source, and the destination is a tape drive.
The library returns a value of 1.
DT -> I/E This field identifies the support for the Move Medium command, where the
source is a tape drive, and the destination is a CAP cell.
The library returns a value of 1.
DT -> ST This field identifies the support for the Move Medium command, where the
source is a tape drive, and the destination is a cartridge tape storage cell.
The library returns a value of 1.
DT -> MT This field identifies the support for the Move Medium command, where the
source is a tape drive, and the destination 1 element is the hand.
The library returns a value of 0.
MT < > DT This field identifies the support for the Exchange Medium command, where
the source and destination 2 elements are the hand, and the destination 1
element is a tape drive.
The library returns a value of 0.
MT < > I/E This field identifies the support for the Exchange Medium command, where
the source and destination 2 elements are the hand, and the destination 1
element is a CAP cell.
The library returns a value of 0.
MT < > ST This field identifies the support for the Exchange Medium command, where
the source and destination 2 elements are the hand, and the destination 1
element is a cartridge tape storage cell.
The library returns a value of 0.
MT < > MT This field identifies the support for the Exchange Medium command, where
the source and destination 2 elements are the hand, and the destination 1
element is the hand.
The library returns a value of 0.
ST < > DT This field identifies the support for the Exchange Medium command, where
the source and destination 2 elements are a cartridge tape storage cell, and the
destination 1 element is a tape drive.
The library returns a value of 0.
ST < > I/E This field identifies the support for the Exchange Medium command, where
the source and destination 2 elements are a cartridge tape storage cell, and the
destination 1 element is a CAP cell.
The library returns a value of 0.
Device Capabilities Page Definitions:
To Next Page
Loading...
Need help?
General
