xvi SL500: Interface Reference Manual • July 2008 Revision: F • 96122
TABLE 5-14 Exchange Content Header 62
TABLE 5-15 Sequence Content Header 63
TABLE 5-16 Timer Summary 65
TABLE 5-17 NL_Port Common Service Parameters, Port Login 67
TABLE 5-18 NL_Port Common Service Parameters, Fabric Login 68
TABLE 5-19 PRLI Parameters 69
TABLE 5-20 PRLI Accept FCP Services Parameter Page 70
TABLE 5-21 FCP 8-B byte LUN 72
TABLE 5-22 FCP_RSP Payload 74
TABLE 5-23 FCP_RSP Code 75
TABLE 5-24 Command Confirmation Usage 76
TABLE 5-25 FCP Task Management Flags 77
TABLE 5-26 FCP Task Attributes 77
TABLE 5-27 Other FCP Features 78
TABLE 5-28 Clearing Effects 80
TABLE 5-29 Reserve/Release Management Method 82
TABLE 5-30 Persistent Reservation Management Method 83
TABLE 6-1 6-Byte Command Descriptor Block 86
TABLE 6-2 10-Byte Command Descriptor Block 86
TABLE 6-3 12-Byte Command Descriptor Block 86
TABLE 6-4 Control Byte 87
TABLE 6-5 Supported Commands 88
TABLE 6-6 Initialize Element Status Command 90
TABLE 6-7 Initialize Element Status With Range Command 91
TABLE 6-8 Inquiry Command 92
TABLE 6-9 Standard Inquiry Data 93
TABLE 6-10 Supported Pages 95
TABLE 6-11 Unit Serial Number Page 96
TABLE 6-12 Device Identification Page Data 97
TABLE 6-13 Fibre Channel Device Identification 98
TABLE 6-14 Log Sense Command 99
TABLE 6-15 Supported Pages Format Page 100
TABLE 6-16 Last n Errors Events Page 101