Supra eKey - Showing Activity Reports

Page 138 Using KIMvoice
Showing activity reports
You can receive a voice or fax report of your Showing activity. Have
the KeyBox serial number and shackle code ready when you dial
KIMvoice on a touch-tone telephone.
Voice report - When you request a voice KeyBox report, KIM reads
you the last nine entries to your KeyBox.
Step KIM Your Response
1
"Hello, this is KIM, the
Advantage Express
computer. Please enter your
KEY number, then your
four-digit PIN number,
followedbythepoundkey."
Enter your eKEY serial
number (located on the back
of your Key) on the
telephone keypad, followed
by your PIN code and the
pound (#) sign.
2 "For an update code, press
1. For a CBS code, press 2.
To request a report, press 5.
To identify the owner of a
Key, press 8. To quit, press
asterisk."
Press 5 on the telephone
keypad.
3"Foravoicereport,press1.
For reports by fax, press 2.
To quit, press asterisk."
Press 1 for voice reports
4 "Please enter the KeyBox
serial number and the
shackle code, followed by
the pound key."
Enter the KeyBox serial
number and the shackle
code for the KeyBox, then
press the pound (#) key.
5
"Getting activity. Please
wait."
KIM reads the activity to
you. Press asterisk at any
time to quit.