Suzuki DR650SE - Page 150

5-37 CHASSIS
MASTER CYLINDER REMOVAL AND
DISASSEMBL Y
• Place a cloth underneath the union bolt on the master
cylinder to catch spilled drops of brake fluid.
• Loosen the rear brake rod lock nut CD.
• Remove the master cylinder mounting bolts @.
• Disconnect the brake rod by rotating brake rod @.
• Disconnect the brake hose @.
• Remove the reservoir tank by removing the mounting bolt
®.
• Remove the connector by removing the circlip ® .
• rooh 09900-06108: Snap ring pliers
• Remove the O-ring (j).
I A CAUTION I
The removed O-ring should be replaced with a new one.
• Remove the dust boot.
• Remove the circlip with the special tool.
.rooh 09900-06108: Snap ring pliers
• Remove the rod, piston, primary cup and spring.