Suzuki DR650SE - Page 44

3·7 ENGINE
• Apply THREAD LOCK SUPER" 1303" to the engine
sprocket mounting bolts and tighten them to the speci-
fied
torque.
~ 99000-32030: THREAD LOCK SUPER "1303"
~ Engine sprocket bolt: 6 N'm (0.6 kg-m, 4.5 Ib-ft)
• Install the oil cooler hoses to the clutch cover and cylinder
head correctly.
I A CAUTION I
Replace the O-rings CD with new one to prevent oil
leakage.
• Tighten the oil cooler hose securing bolts to the speci-
fied
torque.
~ Oil cooler hose bolt: 10 N'm (1.0 kg-m, 7.0 Ib-ft)
• Tighten the front footrest bolts to the specified torque.
~ Front footrest bolt: 39 N'm (3.9 kg-m, 28.0 Ib-ft)
• After remounting the engine, route the wiring harness-
es,
cables and hoses properly by referring to the sections,
for wire routing, cable routing and hose routing. (Refer
to pages 7-12 through 7-18.)